What power cord do I need for an HP Envy laptop?
Most people mean one of two things by “power cord”:
(1) the wall power cable that goes from the outlet to the charger brick, or
(2) the full charger/AC adapter (brick + DC tip) that plugs into your HP Envy.
Here’s the shortcut: the wall power cord is chosen by the charger brick’s AC inlet (C5 vs C7) and your country plug type.
The AC adapter is chosen by your laptop’s required output voltage/wattage and the DC connector (blue tip, center pin, or USB-C).
C5 vs C7 cords
US/UK/EU plug types
Blue tip / center pin / USB-C
Your HP charger category page explains how to match voltage/wattage and connector type, and notes most HP adapters support worldwide input and can be used with the correct mains cable.
- 1) “Power cord” vs “charger”: what are you replacing?
- 2) 60-second checklist (get the right cord the first time)
- 3) C5 vs C7: which wall cord does your HP Envy charger use?
- 4) Choose the correct plug for your country (US/UK/EU/AU)
- 5) When you actually need a full HP Envy AC adapter
- 6) Common HP Envy charging connector types
- FAQ
1) “Power cord” vs “charger”: what are you replacing?
| Part you need | What it looks like | What it does | How to choose the correct one |
|---|---|---|---|
| Wall power cord (mains cable) | Cable from outlet → charger brick | Supplies AC power to the charger brick | Match the brick’s AC inlet: C5 (cloverleaf) or C7 (figure-8), plus your country plug type |
| Full AC adapter / charger | Power brick + DC plug (or USB-C) | Converts AC → correct DC for laptop charging | Match output voltage and wattage, and the laptop-side connector (blue tip / center pin / USB-C) |
First confirm whether the issue is the wall cord, the charger brick, or the laptop-side connector/port.
2) 60-second checklist (get the right cord the first time)
- Look at the charger brick end: does it have a 3-hole “cloverleaf” inlet (C5) or a 2-hole “figure-8” inlet (C7)?
- Confirm your country plug: US / UK / EU / AU, etc. (this only changes the wall side plug).
- If you’re replacing the full adapter: read the label on the brick for Output (V, A/W) and match the laptop connector type.
3) C5 vs C7: which wall cord does your HP Envy charger use?
HP Envy chargers usually use one of these two detachable wall cords:
| Cord type | Nicknames | How to identify | Most common on |
|---|---|---|---|
| IEC C5 | “Cloverleaf”, “Mickey Mouse” | 3 rounded holes in a clover shape | Many 65W / 90W HP Smart AC adapters and larger bricks |
| IEC C7 | “Figure-8” | 2-hole figure-8 shape | Some compact/low-profile adapters and smaller bricks |
Match the cord by the AC inlet on your specific brick.
4) Choose the correct plug for your country (US/UK/EU/AU)
Once you know C5 or C7, the remaining choice is the wall plug type.
Many stores (including your HP charger category) supply a suitable plug type based on the delivery country when possible.
| Region | Typical wall plug | What you should order |
|---|---|---|
| United States / Canada | Type A/B | C5-to-US or C7-to-US (depending on your brick) |
| UK / Ireland | Type G | C5-to-UK or C7-to-UK |
| Most EU countries | Type C/E/F | C5-to-EU or C7-to-EU |
| Australia / NZ | Type I | C5-to-AU or C7-to-AU |
5) When you actually need a full HP Envy AC adapter (not just the cord)
You likely need the full adapter if:
- The charger brick has damage, burns, overheating, or a frayed DC cable.
- Your laptop shows “Plugged in, not charging” and the adapter is not detected (common with Smart AC adapters when the center pin/ID is missing).
- The adapter output is wrong for your Envy (wrong voltage or underpowered wattage).
- You switched to a different connector type (e.g., your Envy uses USB-C charging but you only have a barrel adapter, or vice-versa).
and lists common HP connector types including 4.5×3.0mm (blue tip), 7.4×5.0mm (center pin), and USB-C PD.
6) Common HP Envy charging connector types
| Connector | Where you’ll see it | Why it matters |
|---|---|---|
| 4.5 × 3.0 mm blue tip | Very common on modern HP Envy and many HP 14/15/17 | Must match physically; wrong size won’t seat properly |
| 7.4 × 5.0 mm with center pin | Many older HP laptops; some higher-power models | Center pin is needed for correct detection on Smart AC adapters |
| USB-C Power Delivery | Newer Envy x360 / Spectre and some business lines | Requires USB-C PD charger with enough wattage |
Shop link (HP chargers & adapters)
https://fixing-tools.store/laptop-parts/product-category/charger/charger-for-hp/
FAQ
Is the HP Envy power cord the same thing as the charger?
Not usually. The “power cord” often means the wall cable (C5 or C7). The “charger” means the AC adapter (brick + laptop connector).
My HP Envy charger says 100–240V 50/60Hz. Does that change which cord I need?
It mainly means the brick can work worldwide. You still need the correct wall plug type for your country, and the correct C5/C7 end for your brick.
My Envy isn’t charging—should I replace the wall cord first?
If the wall cord is loose, damaged, or intermittently cuts power, it’s a good first step. But many “not charging” problems are actually the adapter brick,
the laptop-side connector (blue tip/center pin/USB-C), or the DC-in port.
What information should I send to confirm the correct HP Envy charger/cord?
A photo of the charger label (showing Output V/A or W) and a clear photo of the AC inlet shape (C5 vs C7) is usually enough.
If you’re buying a full adapter, also include your laptop model code from the bottom sticker.
Need the correct HP Envy charger or power cord?
Start with the charger brick inlet (C5 vs C7). If you need the full adapter, match voltage/wattage and the laptop connector.