Laptop Adapter Charger Review

If your HP Envy x360 15-w001nx 15-w009ne 15-w070nz is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP Envy x360 15-w001nx 15-w009ne 15-w070nz laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP EliteBook 840 G6 7KK16UT is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP EliteBook 840 G6 7KK16UT laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP Pavilion 15-bk062sa X5W53EA is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP Pavilion 15-bk062sa X5W53EA laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP 15-bs046na is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP 15-bs046na laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP 15-ay101nv X9W90EA is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP 15-ay101nv X9W90EA laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP ENVY 15-ae005tx M9V60PA is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP ENVY 15-ae005tx M9V60PA laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP 245-G2-F7W31LT is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP 245-G2-F7W31LT laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP 15-bs086ur 1VH80EA is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP 15-bs086ur 1VH80EA laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP ENVY-15-AE154NA-P3Z82EA is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP ENVY-15-AE154NA-P3Z82EA laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.

If your HP PAVILION-15-AC019TU-M4Y96PA is not charging when plugged in and displays the message “Plugged in, not charging,” there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

Check the Power Adapter:

 

 

Ensure that the power adapter is properly connected to both the HP PAVILION-15-AC019TU-M4Y96PA laptop and the power outlet. Check for any damage to the power cable or adapter. If possible, try using a different power outlet.

 

Inspect the Charging Port:

Examine the charging port on your laptop for any dust, debris, or damage. If there is anything obstructing the connection, it can prevent proper charging. Use compressed air to clean the port gently.

Remove and Reinsert the Battery (If Applicable):

If your laptop has a removable battery, power it off, remove the battery, and then reinsert it. Sometimes, this simple action can resolve charging issues.
Restart the Laptop:

Restart your laptop and check if the issue persists. Sometimes, a simple reboot can resolve software-related issues.

Update Battery Drivers:

Go to “Device Manager” on your laptop, expand the “Batteries” section, and right-click on the Microsoft ACPI-Compliant Control Method Battery. Select “Update driver” and follow the on-screen instructions.
Check Power Settings:

Open “Power & sleep settings” and click on “Additional power settings.” Ensure that your power plan is set to a balanced or high-performance mode. Sometimes, power settings can affect charging behavior.

Perform a Battery Report:

Open a Command Prompt as an administrator and type the following command to generate a battery report:

powercfg /batteryreport
This report provides detailed information about your laptop’s battery health.

Update BIOS/UEFI:

Check if there is a BIOS or UEFI update available for your laptop on the manufacturer’s website. Sometimes, updates address battery-related issues.
Battery Calibration (If Applicable):

Some laptops may benefit from battery calibration. This involves fully charging and then fully discharging the battery. Check your laptop’s manual or the manufacturer’s website for specific instructions on calibrating the battery.

Check for Windows Updates:

Ensure that your operating system is up to date. Sometimes, Windows updates include fixes for hardware-related issues.
If none of these steps resolve the issue, there may be a hardware problem with the battery or the charging circuit. In such cases, it’s recommended to contact the HP support for further assistance or take the laptop to an authorized service center for professional inspection and repair.